RT/duroid 6006 2-Layer 10mil ENIG PCB for High-Dk Microwave Applications
1.Introduction of RT/duroid 6006
Rogers RT/duroid 6006 laminates are ceramic-PTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. They provide high dielectric constants (Dk) to enable circuit size reduction. These materials are low loss, ideal for operating at X-band or below. Additionally, their tight Dk and thickness control deliver repeatable circuit performance.
2.Key Features
Advanced Material: Rogers RT/duroid 6006 ceramic PTFE composites
High Dielectric Constant: 6.15 ±0.15 at 10 GHz/23°C
Low Loss Performance: Dissipation factor of 0.0027 at 10 GHz/23°C
High Temperature Resistance: Td > 500°C TGA
Environmental Durability: Moisture Absorption 0.05%
Thermal Stability: CTE X-axis 47 ppm/°C, Y-axis 34 ppm/°C, Z-axis 117 ppm/°C
Copper Options: Clad with standard and reverse treated electrodeposited copper foil
Safety Certified: 94-V0 Flammability
Modern Compliance: Lead free compatible
3.Benefits
Space Efficiency: High dielectric constant for circuit size reduction
High Frequency Performance: Low loss, ideal for operating at X-band or below
Consistent Quality: Tight Dk and thickness control for repeatable circuit performance
Environmental Reliability: Low moisture absorption
Structural Integrity: Reliable plated through-holes in multi-layer boards
4.PCB Construction Details
| Parameter | Specification |
|---|---|
| Base Material | RT/duroid 6006 |
| Layer Count | 2-Layer |
| Board Dimensions | 43mm × 107.5mm = 1PC, ±0.15mm |
| Minimum Trace/Space | 4/4 mils |
| Minimum Hole Size | 0.2mm |
| Blind Vias | No |
| Finished Board Thickness | 0.35mm |
| Finished Cu Weight | 1oz (1.4 mils) outer layers |
| Via Plating Thickness | 20 μm |
| Surface Finish | Immersion Gold |
| Top Silkscreen | Black |
| Bottom Silkscreen | No |
| Top Solder Mask | No |
| Bottom Solder Mask | No |
| Electrical Test | 100% tested prior to shipment |
5.PCB Stackup (12-Layer Rigid Structure)
Copper Layer 1 - 35 μm
RT/duroid 6006 - 0.254 mm (10mil)
Copper Layer 2 - 35 μmm
6.PCB Statistics:
Components: 31
Total Pads: 79
Thru Hole Pads: 37
Top SMT Pads: 42
Bottom SMT Pads: 0
Vias: 50
Nets: 2
7.Typical Applications
Patch Antennas
Satellite Communications Systems
Power Amplifiers
Aircraft Collision Avoidance Systems
Ground Radar Warning Systems
8.Quality Assurance
Artwork Format: Gerber RS-274-X
Quality Standard: IPC-Class-2
Availability: Worldwide
